Security keypad does not react to proximity keys:
Use only one key at a time in front of the security keypad.
Make sure you are not using the installer’s key.
The sensitive reader may stop reading keys if there has been a strong power surge (voltage
spike) or magnetic field. Use the secret code to change operating mode instead of the key.
Restart HouseControl from the power switch. Notice that you need to reschedule the report
after restart.
If you have a problem and wish to contact your dealer for assistance, we kindly request
you to fill out the following information in advance:
HouseControl phone number:
GSM subscription type and operator:
HouseControl version number (use command VER):
Accessories:
Person who installed and tested HouseControl:
To Next Page
Loading...
