The programmer consists of 4 buttons:
: Button to change the programming
menu and to save data.
: Button that selects a digit within a
specific programming menu. It also
carries out the change from the normal
menu to the extended menu.
: Button that increases the value of the
selected digit.
: Button that decreases the value of the
selected digit.
With these buttons, we can carry out all the
programming functions.
The universal programmer can be
connected both with the TDT+ turned on
and off. However any programming
functions must be carried out with the
equipment switched on.
4. 4. - Programmer ref. 7234
To Next Page
Loading...
