Page 5
Connect the Power Injector (G) to your ZapperBox/Set-top Box/TV.
Use the RF Cable (I) to connect the Power Injector (G) to Output 3 on the Antenna (A).
Use the USB Cable (F) to connect the Power Injector (G) to the Power Adapter (H).
Plug the Power Adapter (H) into a wall receptacle.
Antenna Connections
TV Connection
For future use (MIMO)*
5G Cellular Out*
3
2
1
1
2
3
4
G
ZapperBox/STB/TV
F
H
1
2
3
I
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
*Input 1 and 2 are capped and terminated
to reduce noise interference.
Manufactured and Imported by:
Televes USA LLC, Norfolk Tech Center
16596 E. 2nd Ave, Aurora, CO 80011
televes.usa@televes.com
Distributed by:
ZapperBox
1776 22nd Street, Suite 200
West Des Moines, IA 50266
info@zapperbox.com
A
To Next Page
Loading...
