Telit Wireless Solutions HE863 Series User Manual

HE863 family AT commands reference guide
80377ST10083a Rev.6 – 2012-11-12
Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved. Page 113 of
229
+CRES - Restore Settings
AT+CRES
[=<profile>]
Execution command restores message service settings saved by +CSAS command
from SIM.
Parameter:
<profile>
0 - it restores message service settings from NVM.
1..n - it restores message service settings from SIM. The value of n depends on the
SIM and its max is 3.
Note: certain settings may not be supported by the SIM and therefore they are
always restored from volatile memory (default value), regardless the value of
<profile>.
AT+CRES=?
Test command returns the possible range of values for the parameter <profile>.
Reference 3GPP TS 27.005

Telit Wireless Solutions HE863 Series Specifications

General

Brand	Telit Wireless Solutions
Model	HE863 Series
Category	Control Unit
Language	English