HE863 family AT commands reference guide
80377ST10083a Rev.6 – 2012-11-12
Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved. Page 33 of 229
+GSN - Serial Number
serial number. HE863 series returns IMEI assigned to the indivisual product.
AT+GSN=?
Test command returns OK result code.
Reference V.25ter
3.5.2.1.12. Display Current Base Configuration And Profile - &V
&V - Display Current Base Configuration And Profile
AT&V
Execution command returns some of the base configuration parameters
settings.
3.5.2.1.13. Display Current Configuration And Profile - &V0
&V0 - Display Current Configuration And Profile
AT&V0
Execution command returns all the configuration parameters settings.
Note: this command is the same as &V, it is included only for backwards
compatibility.
3.5.2.1.14. S Registers Display - &V1
&V1 - S Registers Display
AT&V1
Execution command returns the value of the S registers in decimal and hexadecimal
value in the format:
REG DEC HEX
<reg0> <dec> <hex>
<reg1> <dec> <hex>
...
where
<regn> - S register number
000..005
007
012
025
038
<dec> - current value in decimal notation
<hex> - current value in hexadecimal notation
3.5.2.1.15. Extended S Registers Display - &V3
&V3 - Extended S Registers Display
AT&V3
Execution command returns the value of the S registers in decimal and hexadecimal
value in the format:
To Next Page
Loading...
Need help?
General
