LE910Cx mPCIe Hardware Design Guide
1VV0301510 Rev. 13 Page 8 of 73 2021-07-07
Symbol Conventions
This information MUST be followed or catastrophic
equipment failure or personal injury may occur.
Alerts the user on
important steps about the module
integration.
Provides advice and suggestions that may be useful when
integrating the module.
Electro-static Discharge:
Notifies the user to take proper grounding
precautions before handling the product.
Table 1: Symbol Conventions
All dates are in ISO 8601 format, that is YYYY-MM-DD.
Related Documents
• LE910Cx Hardware User Guide, 1VV0301298
• LE920x4/LE910Cx AT Command User Guide, 80490ST10778A
• Telit EVB User Guide, 1VV0301249
• mPCIe IFBD HW USER GUIDE, 1VV0301483
• LE910/LE920 Digital Voice Interface Application Note, 80000NT11246A
• Event Monitor Application Note, 80000NT10028a
• PCI Express Mini Card Electromechanical Specification, Revision 2.1
To Next Page
Loading...
Need help?
General
