EasyManua.ls Logo

Telstra T-HUB 2 - Using Handset Functions; Handset Contacts; Call Log

Telstra T-HUB 2
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 OK/Select button
• To confirm or select.
From standby, to display new event messages
on the display.
Up
• To scroll up through menus/lists.
• From standby, to open the Dialled calls list.
During a call, to increase the volume of the
callers voice.
Down
• To scroll down through menus/lists.
• From standby, to open the All calls list.
During a call, to decrease the volume of the
callers voice.
Left
• To scroll left through menus/fields.
Right
• To scroll right through menus/fields.
6 End/Power button
• To end a call.
• To exit a menu.
• When holding, to switch the Handset off or on.
7 Call button
• To make or receive a call.
• During a call, to switch to and from handsfree mode.
8 Keypad
To enter numbers/letters.
9 Voicemail
Hold this button down for at least two seconds to check
your Voicemail.
10 Internal calls
Press this button to make an internal call to another
Handset registered to the same Base station.
11 Recall
Press and hold this button to switch to an incoming call
(if Call Waiting is activated on your phone service).
30
MAKING CALLS
• Use keypad to dial number or select from Contact List.
• Press Call button to make call.
To access contacts use scroll keys to select Contacts icon and press OK. Scroll through
Contact List and press Call button to call or press OK to select from a list of numbers.
RECEIVING CALLS
• When you receive a call both the tablet and handset will ring.
• To answer an incoming call on your handset press the Call key.
• To turn the handset ringtone on or off, hold down the # key.

Other manuals for Telstra T-HUB 2