Teltonika FMB020 - Set up Your Device; How to Insert Micro-SIM Card and Connect the Battery

5
FMB020 | Wiki
Set up your device
How to insert Micro-SIM card and
connect the battery
1. Open the top cover of the device. Cover is opened by unclipping it
at the recessed corner.
2. Insert Nano-SIM card as shown with PIN request disabled or read
our Wiki how to enter it later in Teltonika Configurator. Make
sure that Nano-SIM card is fitted properly into the holder.
3. Connect the battery as shown in the figure.
4. After configuration, see “Error! Reference source not found.”,
attach device cover back.
Device is ready to be mounted.
Figure 6 Attach device cover
back
Figure 5 Battery connection
Figure 4 Device case removal
Figure 3 Nano-SIM card insert