Enable (visible) – Bluetooth® functionality will be enabled and any external device will be able
to detect and connect to FMP100.
It is possible to configure the Local name of the device, as well as the Local PIN, which will be used
when trying to pair with the FMP100 device. There are two different parameters:
Local Name parameter lets user declare a visible name of FMP100 to external devices.
Local PIN parameter lets user configure Bluetooth® PIN of FMP100 device.
The FMP100 supports composed Bluetooth® Local names, which allows the user to have a
predefined number of IMEI digits at the end of the device name. The format of the composed
Bluetooth® name looks like this:
Device name + %imeiX
X - how many digits will be taken from IMEI to show in Local name, digits will be taken from the end
of IMEI. Minimum value of X is 1 and the Maximum value is 15.
Example:
If the configured Local Name parameter is "FMB_120_%imei7" and the IMEI of the device is
352093089520901, name will be displayed as FMB_120_9520901 (whether "_LE" is added at the
end depends on whether device supports BLE or not. The full name of the device, which supports
BLE would be FMB_120_9520901_LE).
If the Local Name is written incorrectly, the Bluetooth® name of the device will be broadcasted as it
is. An example can be seen below.
Example:
If the configured Local Name parameter is "FMB_120_%ime7" devices name will be broadcasted as
FMB_120_%ime7 or if wrong X will be configured, for example "FMB_120_%imei20" devices name
will broadcasted as FMB_120_%imei20.
The Composed Bluetooth® name is supported from 03.25.05 firmware version.
FMP100 Bluetooth® has several different Security Modes:
PIN only – only Local PIN will be reacquired to complete connection to FMP100.
PIN + MAC list – PIN and Authorized Devices MAC List will be checked against to allow
connection to FMP100. If the external device MAC ID is in the list and correct Local PIN is
entered then connection will be established, otherwise FMP100 will reject connection.
MAC list only – only Authorized Devices MAC List will be checked when trying to connect to
FMP100. If external device MAC ID is in the list then connection will be established, otherwise
FMP100 will reject connection.
None – neither Local PIN nor Authorized Device MAC List will be checked.
Auto Connect to External Device
To Next Page
Loading...
