Teltonika FMC003 - User Manual

https://wiki.teltonika-gps.com/view/FMC003_First_Start
FMC003 First Start
Main Page > OBD Trackers > FMC003 > FMC003 First Start
Advanced Plug and Track real-time tracking terminal with GNSS, GSM and Bluetooth
connectivity
Contents
1 How to insert Micro-SIM card and connect battery
2 Pinout
2.1 PC Connection (Windows)
2.2 How to install USB drivers (Windows)
2.3 Configuration (Windows)
2.4 Quick SMS configuration
3 Safety information
3.1 Precautions
How to insert Micro-SIM card and connect battery
Gently remove FMC003 cover using plastic pry tool from both sides.1.
Insert Micro-SIM card as shown with PIN request disabled or read Security info how to2.
enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing
forward to slot.
Connect battery as shown to device. Position the battery in place where it does not obstruct3.
other components.
Attach device cover back.4.
Device is ready to be connected.
Micro-SIM card insertion/removal must be performed when device is powered off –
external voltage and battery are disconnected. Otherwise Micro-SIM card might be
damaged or device will not detect it.

Summary

How to Insert Micro-SIM Card and Connect Battery

Pinout

PC Connection (Windows)

Describes connecting the FMC003 device to a PC via Micro-USB or Bluetooth.

How to Install USB Drivers (Windows)

Provides steps to download and install necessary USB drivers for PC connection.

Configuration (Windows)

Explains initial device configuration using Teltonika Configurator software.

Quick SMS Configuration

MS.NET Requirements

Lists prerequisite Microsoft .NET Framework versions for the Configurator.

Default Configuration Settings

Safety Information

Precautions

Outlines essential precautions and warnings for safe device operation and handling.

Teltonika FMC003 Specifications

General

Brand	Teltonika
Model	FMC003
Category	GPS
Language	English