Teltonika FMC001 User Manual

https://wiki.teltonika-gps.com/view/FMC001_First_Start
FMC001 First Start
Main Page > OBD Trackers > FMC001 > FMC001 First Start
Advanced Plug and Track real-time tracking terminal with GNSS, GSM and Bluetooth
connectivity
Contents
1 How to insert Micro-SIM card and connect battery
2 Pinout
2.1 PC Connection (Windows)
2.2 How to install USB drivers (Windows)
2.3 Configuration (Windows)
2.4 Quick SMS configuration
3 Safety information
3.1 Precautions
How to insert Micro-SIM card and connect battery
Gently remove FMC001 cover using plastic pry tool from both sides.1.
Insert Micro-SIM card as shown with PIN request disabled or read Security info how to2.
enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing
forward to slot.
Connect battery as shown to device. Position the battery in place where it does not obstruct3.
other components.
Attach device cover back.4.
Device is ready to be connected.
Micro-SIM card insertion/removal must be performed when device is powered off –
external voltage and battery are disconnected. Otherwise Micro-SIM card might be
damaged or device will not detect it.

Teltonika FMC001 Specifications

General

Device Type	GPS Tracker
Weight	120 g
GPS Accuracy	2.5 m
IP Rating	IP54
GNSS	GPS, GLONASS
Tracking sensitivity	-165 dBM
2G bands	850/900/1800/1900 MHz
Bluetooth	No
Internal Battery	No
Digital Inputs	2
Digital Outputs	1
Analog Inputs	1
1-Wire	Yes
CAN adapter	No
LED indication	Yes
GPS Module	u-blox
GPS Sensitivity	-165 dBM
Connectivity	2G
Operating Temperature	-40 °C to +85 °C (without battery)
Hot start	< 1 s
Cold start	42 s
Technology	GSM/GPRS
Data transfer	GPRS
SIM	Mini SIM
Interface	RS232
Antenna	Internal