EasyManuals Logo

Teltonika RUT550 User Manual

Teltonika RUT550
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
11
Back Panel
1
GSM (LTE) main antenna connector
2
Wi-Fi antenna connector
3
GSM (LTE) auxiliary antenna connector
(unavailable on alternate model)
4
Reset button
5
GSM LED
SIM Card
1. Remove back panel and insert SIM card which was given by your ISP (Internet Service Provider). Correct SIM
card orientation is shown in the picture.
2. Attach GSM (LTE) main and Wi-Fi antennas.
3. Connect the power adapter to the socket on the front panel of the device. Then plug the other end of the power
adapter into a wall outlet or power strip.
4. Connect to the device wirelessly (SSID: Teltonika) or use Ethernet cable and plug it into any LAN Ethernet port.
Logging in
After you’re complete with the setting up as described in the section above, you are ready to start logging into your
router and start configuring it. This example shows how to connect on Windows 7. On windows Vista: click Start ->
Control Panel -> Network and Sharing Centre -> Manage network Connections -> (Go to step 4). On Windows XP: Click

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Teltonika RUT550 and is the answer not in the manual?

Teltonika RUT550 Specifications

General IconGeneral
Wireless Standard802.11b/g/n
Max Wireless Speed150 Mbps
GPSNo
Operating SystemRutOS (Based on OpenWRT)
FirewallYes
SMS SupportYes
Firmware UpdatesYes
Power Supply12V DC
Operating Temperature-40°C to 75°C
LED IndicatorsPower, Network, WiFi
Cellular Connectivity4G LTE, 3G
VPN SupportIPsec, OpenVPN, PPTP, L2TP
Serial InterfaceRS232
WAN Ports1 x 10/100/1000 Mbps
LAN Ports4 x 10/100/1000 Mbps
SIM Card Slot1 x Micro-SIM

Related product manuals