Need help?Do you have a question about the Tely Labs telyHD Pro and is the answer not in the manual?
General| Aspect ratio | 16:9 |
|---|---|
| Maximum frame rate | 24 fps |
| Supported video modes | 720p |
| Video formats supported | H.263, H.264 |
| Supported graphics resolutions | 1280 x 720 (HD 720) |
| Voice codecs | G.722, G.722.1 |
| Built-in display | No |
| Ethernet LAN | Yes |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Security algorithms | 128-bit AES, 256-bit AES, RSA, SRTP, WEP, WPA, WPA2 |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Maximum data transfer rate | 1.5 Mbit/s |
| AC input voltage | 100-240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 5 W |
| Storage temperature (T-T) | -20 - 45 °C |
| Operating temperature (T-T) | 0 - 35 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
Weight and Dimensions| Depth | 99.06 mm |
|---|---|
| Width | 273 mm |
| Height | 69.85 mm |
| Weight | 385.6 g |
To Next Page