www.temcoline.com
DIGITAL PID CONTROLLER
Use a separate safety device when this product is used to control a
device that could harm lives or expensive property in the event of a
malfunction or a breakdown. (This may cause fires, deaths, or damage
to property.)
Please conduct an inspection when water has entered the product.
(It may cause short circuits, fires, and malfunction.)
Do not use this controller at place where there are flammable or
explosive gas. (It may cause a fire or explosion.)
This controller should be used indoors.
(It may shorten the controller's life or give an electric shock.)
Before turning the power on, please check that wiring is
correct to the number of terminal. (It may cause a fire.)
Observe the rated voltage and specification.
(It may cause a fire or shorten the controller's life.)
Turn off the power during wiring and maintenance to avoid an
electric shock.
Be careful that any of foreign materials do not inflow into the
controller. (It may cause a fire or malfunction of the controller.)
Do not touch the terminals when it is power on. (It may give an
electric shock.)
Do not give direct vibration or shock to the controller.
(It may cause of malfunction of the controller.)
This controller must be mounted on the panel to avoid an
electric shock.
Do not use chemical detergent or solvent, but use a dry towel in
cleaning the controller.(It may cause an electric shock or a fire.)
Do not attempt to disassemble, modify and repair.
Please check the polarity of power before wiring and connecting the
sensor. (It may cause an electric shock or explosion.)
1.
1.
2.
2.
3.
3.
4.
4.
5.
5.
6.
6.
7.
7.
3
To Next Page
Loading...
Need help?
General
