Temcoline T30 SERIES - Error Indication During Operation

www.temcoline.com
DIGITAL PID CONTROLLER
9) Error indication during operation
B.OUT : INPUT SENSOR error or burn out etc.
+OVR : Out of maximum input range (refer to input group setting) or overheating
-OVR : Out of minimum input range (refer to input group setting) or overcooling
SYS.E : SYSTEM setting error or Memory damage (request for repair)
RJC.E : RJC Sensor damage or PCB burn (request for repair)
EEP.E : EEPROM damage (request for repair)
COM.E : Communication ERROR (request for repair)
AT.E : Auto Tuning Error, Checking heater break or controller
33