TEMO 450 - Mounting TEMO-450 onto Oarlock; Use Without the Oarlock

ENG
19
2. MOUNTING THE TEMO·450
ONTO THE OARLOCK
To mount the TEMO
.
450ontotheoarlock,youmust:
1. Unscrew its head.
2. Fit the motor on the axle.
3.Carefullyscrewtheoarlockheadbackon.
3. USE WITHOUT THE OARLOCK
The TEMO
.
450canbeusedwithoutitsoarlock,butprecauonsmust
betakenwhenusingit.
Fixing nut of the TEMO·450 on
the oarlock fitting
CAUTION
When installing the TEMO
.
450 on your
dinghy at sea, you will need to move
around the boat. Extra vigilance is required
in order to avoid falling overboard.
WARNING
WARNING
Before each use of the TEMO·450, check
the condion of the oarlock ng and
the robustness of its xaon on the sup-
port surface.
When using without an oarlock ng, be
careful to gradually control theTEMO·450's
power.
DANGER
Without the oarlock ng, the
risk of instability is greater and can
cause a fall overboard. Extra vigi-
lance is required.