TEMO 450 - Extension Adjustment and Handle Orientation

ENG
20
4. EXTENSION ADJUSTMENT
AND HANDLE ORIENTATION
Theclampallowsthetelescopicarmtobeextendedorretractedto
suitanynormaluseoftheTEMO
·
450.
Toadjusttheposionoftheextension,youmust:
1.Opentheange.
2.Unscrewbyaquarterturn,ifnecessary.
3. Adjust to the desired length.
4.Posionthehandleandthetubetoadjustthemtoyourposion
inthevessel.
5.Screwaquarterturnifyouhaveunscrewedtheange.
6.Tightentheange.
BeforeusingtheTEMO·450,pleasecheckthattheclampissucient-
lyghtenedandthatthetelescopictubedoesnotmove
CAUTION
Do not deploy the extension beyond the
mark on the tube, indicated by the stop
mark and the red band.
STOP mark on the TEMO
.
450
Opening and adjusting the clamp Closing the clamp