Tempco TEC-9300 - 1-7 Parameter Description

4
1–4 Keys and Displays
The unit is programmed by using the three keys on the front panel. The available key functions are listed in the following table.
Alarm 1 Indicator
Alarm 2 / Output 2 Indicator
Process Value Indicator
Process Unit Indicator
Upper Display,
to display process value,
menu symbol and error
code etc.
Lower Display,
to display set point value,
parameter value or control
output value etc.
3 Silicone Rubber Buttons
for ease of control setup
and set point adjustment.
Set point
Value
Indicator
Output 1
Indicator
A1 A2 PV
°F
SV
OUT
For a number with decimal point the
display will be shifted one digit right:
-19999 will be displayed by:
45536 will be displayed by:
-9999 will be displayed by:
How to display a 5-digit number
-199.99 will be displayed by -199.9
4553.6 will be displayed by 4553
For a number without decimal point
the display will be divided into two
alternating phases:
TEC
-9300
Indicates Abstract Characters
A E
I
N
S
X
B
F
J
O
T
Y
C
G
K
P
U
Z
c
H
L
Q
V
?
D h
M
R
W
=
°C
Figure 1.4 Front Panel Description
Table 1.3 Display Form of Characters