8
Remote Control arrives paired to the adjustable base.
Three (3) AAA batteries are required to operate the remote.
Head Position Adjustments (A, B)
Use to raise and lower the head
section of your adjustable base.
Foot Position Adjustments (C, D)
Use to raise and lower the foot
section of your adjustable base.
Bed FLAT Button (E)
Press down and hold for three
(3) seconds to return bed to flat
position.
Zero Gravity (F)
Use to adjust your legs to relieve
pressure off the lower back.
For optimal performance, please
return the bed to the flat position
prior to selecting the Zero Gravity
preset position.
ADJUST
remote control
For customer support, call Customer Service AUS: 1800 763 498, NZ: 0800 483 6789
I M P O R T A N T !
For your safety, read the owner’s manual carefully and completely
before operating this product. Electric shock may occur if electrical
components are not installed or operated according to these
guidelines.
A) HEAD UP
button
C) FOOT UP
button
B) HEAD DOWN
button
D) FOOT DOWN
button
E) Bed FLAT
button
F) Zero-G
®
To Next Page
