3 Verify Internet Connection Settings
System automatically skips to the status page when you finish all needed settings
on the home page. Here you can see the system status and WAN connection
status of the device.
1. If you find "Connected" and a WAN IP address displayed there (as shown
below), you have got a wired internet access now.
2. If connection status displays "Disconnected" and there is no WAN IP address
displayed (as seen below), connection between the Internet-enabled modem
and your device may have failed. Please double check or re-connect all
involved devices and cables properly and then refresh the page. If nothing is
wrong, "Connecting" or "Connected" will be displayed.
3. If "Connecting" is displayed and no WAN IP address is seen, try refreshing
the page five times. And if it still displays "Connecting" try steps below:
To Next Page
Loading...
