1.3 MAC Clone
Some Internet service providers (ISPs) require end-user’s MAC address to
access their network. This feature copies the MAC address of your network
device to the router.
1. MAC Address: Configure device’s WAN MAC address.
2. Clone MAC Address: Click to copy your PC's MAC address to the device as
a new WAN MAC address.
3. Restore Default MAC: Reset device’s WAN MAC to factory default.
1.4 WAN Speed
Here you can set the speed and duplex mode for WAN port. It is advisable to
keep the default Auto setting to get the best speed.
1.5 LAN Settings
Click Advanced > LAN Settings to enter the screen below:
To Next Page
Loading...
