3. To permit a wireless device to connect to your wireless network, select Permit,
enter its MAC address, click Add and then OK. Then only this device listed
as “Permitted” will be able to connect to your wireless network; all other
wireless devices will forbidden.
Example: To forbid the PC at the MAC address of C8:3A:35:65:82:E6 from
connecting to your wireless network, do as follows:
Step1. Select an SSID, say, Tenda_178ED8.
Step2. Select Forbid from the corresponding drop-down menu.
Step3. Enter C8:3A:35:65:82:E6 in the MAC address box and click Add.
Step4. Click OK to save your settings. You can add more wireless MAC
addresses you wish to forbid.
2.5 Wireless Client
Here you can see a list of wireless devices connected to the router, including
their MAC addresses and bandwidth
To Next Page
Loading...
