adapter; if the adapter successfully joins the wireless network, the WPS LED
will display a solid light. Repeat steps above if you want to add more wireless
adapters to the router.
2. Reset OOB: Clicking this button will reset SSID to factory default and
disable security mode.
3. Existing wireless settings will still be maintained by default after a successful
WPS connection. Namely security settings and SSID on the router will still be
the same. If you want to generate a random wireless key via WPS, click Reset
OOB and then follow WPS setup instructions above.
Note:
1. To use the WPS security, the wireless client must be also WPS-capable.
2. Before you press the hardware WPS button on the device for WPS/PBC
connection, making sure the WPS feature has been enabled on the device.
2.3 Wireless Extender
WISP Mode
If your router acquires Internet access from a wireless Access Point, please
select WISP mode. Specific steps are as follows:
1. Click Wireless>Wireless Extender, select WISP mode and click Open
Scan.
To Next Page
Loading...
