3. Policy Name: Briefly describe the current rule (It can only consist of numbers,
letters, or underscore).
4. MAC Address: Specify a MAC address for a corresponding MAC filter rule
to apply to.
5. Time: Specify a time period for a current rule to take effect. If the field is set
to 0:00-0:00, the rule will be applied 24hrs/day.
6. Day(s): Select a day or several days for a current rule to take effect. If
Sun-Sat is selected, the rule will apply 7days/week.
7. Enable: Check/uncheck to enable/disable the feature.
8. OK: Click to activate your settings.
For Example:
To allow a PC at the MAC address of 00:E4:A5:44:35:69 to access Internet from
Monday to Friday.
a) Filter Mode: Select Permit Only.
b) Access Policy: Select an access policy number, say, 1, from the drop-down
list.
c) Policy Name: Briefly describe the current rule, say, Permit_only, (It can only
consist of numbers, letters, or underscore).
d) MAC Address: Enter 00:E4:A5:44:35:69.
e) Time: Select 0 for all fields to apply the rule 24hrs/day.
f) Day(s): Select Monday to Friday.
g) Enable: Check the Enable box.
h) OK: Click to save your settings.
To Next Page
Loading...
