3G 11N Wireless Router
¾ ADSL Virtual Dial-up (via PPPoE)
This way is used when the Router is connected to the
wireless modem or you want to amplify wireless signals
and share the Internet with multiple computers. Enter
the Account and Password provided by your ISP, and
click “Next”. If you are not clear, please contact your
ISP.
For example：
If the Account is pppoe_user and Password is 123456,
you need to enter the information as the diagram below.
Please enter the Account and Password provided by
your ISP.
¾ Dynamic IP (via DHCP)
If you are provided the Dynamic IP connection mode by
your ISP or you want to amplify wireless signals, please
select “Obtain the IP address automatically”. Click
“Next” and “Save” to finish settings.
If the IP address of the WAN port is not 0.0.0.0 on the
Router’s running status Web page, it means you can
27
To Next Page
Loading...
