4G680V2.0
11
2.2 Network Setup
2.2.1 WAN Setting
1) Connect Ethernet cable between your PC/Notebook and one of the four available LAN ports
on 4G680V2.0.
2) Connect Ethernet cable between WAN ports of your ADSL/CABLE modem and WAN port of
4G680V2.0. Please make sure your ADSL/CABLE modem is working properly. Contact your
ISP if you have any question.
3) Power up 4G680V2.0.
2.2.2 3G/4G Setting
When using SIM card to access network, you could also make phone calls or send text messages.
To Next Page
Loading...
Need help?
General
