4G680V2.0
20
3.7 Wi-Fi
3.7.1 Basic
It shows some information of the wireless connection.
Enable: Open or close the router wireless function.
Mode: Choose Wireless network protocol such as 11b/g/n and mixed type.
Channel: The channel currently used. You can select channel from 1 to 13. The router will choose
the frequency by itself if you select the “Auto”.
SSID: Set the SSID. You can connect the router by this SSID. It can be hidden or isolated. If select
Hide function, the router’s SSID cannot be scanned; Select Isolated function, it can prevent wireless
communications.
Hide SSID: Enable this function, wireless client will not scan to the router’s SSID.
The router’s security mode supports (Disable， WEP(AUTO)，WPA-PSK，WPA2-PSK，
WPAPSKWPA2PSK).
To Next Page
Loading...
