Tenda AC7

91
Parameter
Description
Start ID
The configuration is required when the IPv6 DHCP type is set to Manual.
It specifies the range of the last segment of the IPv6 address that the DHCPv6 server assigns
to the devices. Range: 1 to ffff.
End ID
IPv6 DNS
It specifies the LAN IPv6 DNS configuration method.
⚫
Auto: Obtain the IPv6 DNS address from the upstream device.
⚫
Manual: Configure the IPv6 DNS address manually.
Primary
IPv6 DNS
It specifies the fixed IPv6 DNS address provided by your ISP here.
If your ISP only provides one DNS server address, you can leave the Secondary IPv6 DNS
blank.
Secondary
IPv6 DNS