Tips:
If ISP offers you parameters, you need to use them to manually register the ONT.
Method:
➊ Use an Ethernet cable to connect a LAN port of the ONT to a computer, or connect your
smartphone to the Wi-Fi network of the ONT using the SSID (Wi-Fi name) and Key (Wi-Fi
password) on the bottom label.
➋ Enter 192.168.1.1 in a web browser and log in to the web UI of the ONT (default login user name
and password are both admin).
➌ Navigate to Admin > GPON Settings (or EPON Settings) and enter the parameters provided by
ISP.
1. Connect and register the ONT
DO NOT look directly at the PON port when the device is powered on, as well as the terminal of the indoor
fiber cord, to prevent any harm to your eyes.
Connect the ONT as shown in the figure. Wait until the PON LED indicator lights solid on, then the ONT
is registered successfully.
Caution, laser
ON/OFF
PON
PWR
USB
WPS
WLAN
TEL LAN4 LAN3 LAN2 LAN1
RESET
Power adapter
Internet
Press to turn on
the ONT
Fiber cord
➊
➋
➌
3
To Next Page
Loading...
Need help?
General
