156
----End
Parameters description
It Specifies whether to enable the DDNS function.
It specifies Dynamic Domain Name Service provider. The device supports Dyndns,
No-ip.com, and 3322.org.
It specifies the user name used to log in to the dynamic DNS service, as well as the
login user name and password you registered on the website of the service provider.
It specifies the domain name information obtained from the dynamic DNS server. You
need to enter the domain name which you registered on the website manually.
Example of configuring DDNS
Networking requirement
The device is used to bridge to the ISP hotspot for internet access in a house in the countryside,
and the device is set to WISP mode. The WAN IP address of the device is dynamic.
Requirement: The administrator on business can visit the resources on web server in LAN.
You are recommended to use the DDNS and port forwarding functions to solve the problem.
Assume that:
The information of the web server in LAN is shown as follows:
− IP Address: 192.168.2.100
− Service Port of the Web Server: 80
To Next Page
Loading...
Need help?
General
