2 Quick Installation Guide
❸ Enter the key of the base AP and click Next.
❹ Make sure the IP address is different from the base AP’s IP address but on the same network
segment and click Next. In this example, the base AP’s IP address is 192.168.2.1, and you can set
IP addresses of AP1, AP2, AP3 and AP4 to 192.168.2.3, 192.168.2.4, 192.168.2.5 and 192.168.2.6
respectively.
❺ Click Save to apply your changes. Wait until the device restarts automatically.
To Next Page
Loading...
