How to Enable the UPNP Settings
When UPnP is enabled on your device, a network device possessing a specific purpose, such as a
printer, can be identified and used automatically by another computer or device on your network.
If the UPNP protocol is disabled, other devices behind this device may have difficulty
communicating their identification or purpose. Access your device to turn on UPNP. Click
Advanced > Network Service and slide to the bottom of this page to locate the UPNP section.
How to Prioritize Your Network Bandwidth Usage
The section helps you to improve network performance by specifying the downstream/upstream
speed for computers. Note that this function is only available in WISP and Router mode. Click
Advanced > Traffic Control to enter page below:
To Next Page
Loading...
