❸ Port: Specify the management port to be open to outside access. The default setting is 8080.
This can be changed.
❹ Click Save to apply your changes.
Type http://102.33.66.88:8080 into your browser’s address or location field and you can access
the device at your home remotely.
Tools
How to Configure System Time for Your Device
This section assists you in setting the device's current time; you can select to either set the time
and date manually or obtain the GMT time from the Internet automatically. System time can be
configured using the following 2 methods:
Synchronized with the Internet: If enabled, system automatically connects to NTP server on the
Internet to synchronize the time.
Manual: Specify the time and date manually or click Synchronized with local time to
automatically copy your current PC's time to the device.
To Sync with Internet time servers:
❶ Click Tools > Date & Time to enter page below.
❷ Select Synchronized with the Internet.
❸ Select a time interval from the drop-down list.
❹ Select your time zone.
❺ Click Save.
To Next Page
Loading...
