For a better and reasonable network bandwidth experience, here you can configure the bandwidth
to limit the speed of users with different IPs. Click Add to enter page below:
Remarks --- Description of the rule.
Start/End IP --- If you want to specify a rule for several devices which get IPs within an IP
range, you need to enter the start IP and end IP to these two fields respectively.
Max Upstream/Downstream --- Specify an upstream/downstream bandwidth range limit on
specified PC(s). Note that maximum upstream/downstream bandwidth should not exceed
your router's WAN bandwidth limit. (Consult your ISP if you are not clear.)
How to Visit the Intranet Resource from the Internet by Configuring
Port Forwarding Settings
Port forwarding is useful for web servers, ftp servers, e-mail servers, gaming, and other
specialized Internet applications. When you enable Port Forwarding, the communication requests
from the Internet to your router’s WAN port will be forwarded to the specified IP address.
Note that this function is only available in WISP and Router mode.
Application Example:
Your PC (PC1: 192.168.0.101) connects to the device and runs an FTP server on port number 21.
Your friend (PC2: 192.36.244.96) from the Internet wants to access the FTP server on your PC.
To Next Page
Loading...
