35
Step 3 Select the SSID of the router and click Next at the bottom of the page.
If you cannot find the SSID of the router from the list, ensure that the WiFi network of the router is
enabled. Only the WiFi networks at the same band as that of the CPE will be displayed in the list.
Step 4 Enter the WiFi password of the router in the Key text box, and click Next.
Step 5 Set the IP address to an unused IP address belonging to the same network segment as
that of the router. For example, if the IP address of the router is 192.168.2.1, you can set
this device’s IP address to 192.168.2.X (X ranges from 2 to 254). Then click Next.
To Next Page
Loading...
Need help?
General
