Ping
Ping is a computer network administration utility used to test the reachability of a host on an
Internet Protocol (IP) network and to measure the round-trip time for messages sent from the
original host to a destination computer.
To implement Ping action, click Tools > Diagnose and finish settings as shown below:
❶ Select Ping from the Network Diagnose drop-down menu.
❷ Select the IP address you wish to diagnose or select Manual to enter the IP or domain name
manually.
❸ Set the number of Ping packets within the range from 1 to 10000.
❹ Set the packet size within the range from 1 to 60000.
❺ Click Start to Ping the network.
Then you can view the Ping info below.
To Next Page
Loading...
