How to Log in to Web UI in a More Secure Way
This function enables you to log in to its web UI in a more secure way.
Configuration Steps:
❶ Click Advanced > Network Service and locate the HTTP web service feature.
❷ Check the Enable box to enable HTTP web service feature.
❸ Enter the HTTP web service port. By default, it is port 80.
❹ Click Save at the bottom of this page to apply your changes.
❺ Then you need to enter “http://login IP address: port No.” in the address bar to log in to its
web UI. Here we enter “http://192.168.2.1:80” in the address bar.
How to Configure the Idle Timeout
You are automatically logged out of the web UI after a period of inactivity. You can set the length
of the inactive period. To change the page idle timeout, click Advanced > Network Service,
locate the Page Timeout field, set the page timeout you wish to (Range: 1~60 minutes) and click
Save.
To Next Page
Loading...
