Tenda I-WL-O3 User Manual

11
2. Select AP, and click Next.
3. Set an SSID, which is Tenda_123456 in this example, Security Mode, which is WPA2-PSK in
this example, and Key, and click Next.
4. Click Save, and wait until the CPE reboots automatically to activate the settings.
Step 4 Set CPE2 to Client Mode.
1. Perform the procedure in Step 2 Connect the computer to CPE1 to connect the computer to
CPE2.

Tenda I-WL-O3 Specifications

General

Brand	Tenda
Model	I-WL-O3
Category	Network Router
Language	English