Tenda I-WL-O3 User Manual

175
----End
9.2 Maintenance
9.2.1 Reboot device
If a setting does not take effect or the device works improperly, you can try rebooting the device
to resolve the problem.
When the device reboots, the current connections will be disconnected. Perform this operation when
the device is NOT busy.
Configuration procedures:
Step 1 Start a web browser on the computer connected to the CPE, visit 192.168.2.1 and choose
Tools > Maintenance.
Step 2 Click Reboot.

Tenda I-WL-O3 Specifications

General

Brand	Tenda
Model	I-WL-O3
Category	Network Router
Language	English