N3 11N Wireless Broadband
Router User Manual
Dynamic IP
Select Dynamic IP if your ISP does not give you any IP information or
account information. Generally speaking, you don’t need to configure any
settings for this connection. However for the sake of security, we
recommend you to setup a wireless security key on this interface to
protect your wireless network from undesired access. Then click the OK
button to save your settings.
● The default Internet connection type is PPPoE. Contact your ISP if you
are not clear about the PPPoE user name and password.
● Go to Chapter4 > WAN Settings, if you are using an Internet connection
16
To Next Page
Loading...
