N3 11N Wireless Broadband
Router User Manual
connection type (For example, select DHCP/Dynamic IP, if your ISP is
using a dynamic IP connection.).
4.7 Bandwidth Control
The bandwidth control feature can be used to simultaneously
regulate traffic of up to 254 computers on your LAN network. It allows you
to regulate a group of PCs’ traffic by specifying a range of IP addresses.
● Enable Bandwidth Control ： Check/uncheck the box to
enable/disable bandwidth control. It is disabled by default.
● IP Address： Enter an IP address (same number in both boxes) or a
range of IP addresses (different numbers in two boxes) of the PCs whose
29
To Next Page
Loading...
