N3 11N Wireless Broadband
Router User Manual
● DMZ Host IP Address: Enter the IP address of a LAN computer which
you want to set to a DMZ host.
● Enable: Check/uncheck to enable/disable the DMZ host.
● For example: You can set a LAN computer at the IP address of
192.168.2.10 as a DMZ Host to intercommunicate with another host on
the Internet.
NOTE: If you set a PC to a DMZ host, it will be completely exposed
to extranet and gains no more protection from the device firewall.
7.3 UPnP Settings
UPnP (Universal Plug and Play) allows a network device to discover
and connect to other devices on the network. With this feature enabled,
hosts in LAN can request the device to perform special port forwarding so
51
To Next Page
Loading...
