N3 11N Wireless Broadband
Router User Manual
4.4 MAC Address Clone
This section allows you to configure router’s WAN MAC address.
Some ISP may require binding an accepted MAC address for
communication. If the bound MAC address differs from your router’s
predefined WAN MAC address, then you need to replace the router’s
WAN MAC with the bound MAC for achieving valid communication with
your ISP.
● MAC Address: Configure router’s WAN MAC address.
● Clone MAC Address: Clicking this button changes router’s WAN MAC
address from default to the MAC address of the PC you are currently on.
Don’t use this button unless your PC’s MAC address is the one bound by
your ISP.
Restore Default MAC: Restores router’s WAN MAC to default settings.
4.5 DNS Settings
The Domain Name System (DNS) is a hierarchical naming system for
26
To Next Page
Loading...
