N3 11N Wireless Broadband
Router User Manual
● Note: If you select ASCII, enter 5 or 13 valid ASCII characters; or if you
select Hexadecimal, enter 10 or 26 Hexadecimal characters.
● Default Key: Select one key from the 4 preset keys.
5.3 MAC-based Wireless Access Control
The MAC-based Wireless Access Control feature can be used to
allow or disallow clients to connect to your wireless network.
● MAC Address Filter: “Permit” means to permit PCs at specified MAC
addresses to connect to your wireless network while “Forbid” means to
block PCs at specified MAC addresses from connecting to your wireless
network.
● MAC Address ： Enter the MAC addresses of a wireless client and
click “Add”.
● MAC Address List: Displays the MAC addresses added by you. You
can delete any entry by clicking on the “Delete” button nearby.
43
To Next Page
Loading...
