N3 11N Wireless Broadband
Router User Manual
Chapter 8 Security Settings
8.1 Client Filter
To better manage the computers in LAN, you can regulate LAN
computers’ access to certain ports on Internet using Client Filter
functionality.
● Filter Mode: Select Forbid only or Permit only according to your own
needs.
● Access Policy: Select a number (indicating a filter rule) from the drop-
down menu.
● Remark: Enter a meaningful name to yourself for a new filter rule.
● Start /End IP Address: Enter a starting/ending IP address.
● Port: Enter TCP/UDP protocol port number (s); it can be a range of
ports or a single port.
● Type: Select a protocol or protocols for the traffic (TCP/UDP/Both).
● Time: Select a time range for the rule to take effect.
● Day: Select a day or several days for the rule to take effect.
● Enable: Check to enable or uncheck to disable a corresponding filter
rule （allow/disallow matched packets to pass through router）.
● Example 1: To prohibit PCs within the IP address range of
192.168.0.100--192.168.0.120 from accessing Internet from Monday to
53
To Next Page
Loading...
