N3 11N Wireless Broadband
Router User Manual
from 1 to 11. You can also select “Auto Select” to let system detect and
choose one that best fits your network.
● WMM-Capable： Enabling this option may boost transmission capacity
of wireless multimedia data (such as online video play).
ASPD Capable：Auto power saving mode for WMM feature, disabled by
default.
● Channel Bandwidth: Select a proper channel bandwidth to enhance
wireless performance. When there are 11b/g and 11n wireless clients,
please select the 802.11n mode of 20/40M frequency band; when there
are only non-11n wireless clients, select 20M frequency band mode; when
the wireless network mode is 11n mode, please select 20/40 frequency
band to boost its throughput.
● Extension Channel： Indicates the working network frequency range
for 11n mode.
● WDS Mode: To extend your existing wireless network coverage, select
the WDS (Wireless Distribution System) feature.
● AP MAC Address: Enter the MAC address of a wireless link partner or
populate this field using the Open Scan option.
● Application example: Implement the WDS feature using 2 N30
.wireless router labled N30-1 and N30-2.
1. Change the default wireless working mode of AP on N30 to WDS
as shown in the figure below:
35
To Next Page
Loading...
