N3 11N Wireless Broadband
Router User Manual
3）. Click OK to save your settings.
4）.Configure wireless security settings. For this step, refer to section 5.2
hereof.
5 ） . Repeat steps 1-4 on N30-2. After the 2 routers have added each
other’s MAC address and share the same SSID, channel, security
settings and security key, the WDS feature can be implemented.
Note:
1. WDS feature can be implemented only between 2 wireless devices
that both support the WDS feature. Plus, SSID, channel, security settings
and security key must be the same on both devices. Using the Open
Scan option and selecting link partner from the scan list automatically
change the router’s existing SSID and channel settings respectively to
those of link partner as well as add link partner’s MAC address. So we
38
To Next Page
Loading...
