N3 11N Wireless Broadband
Router User Manual
The Remote Web-based Management feature allows users to
configure your router from Internet via a web browser.
● Enable: Check or uncheck to enable or disable the remote web-based
management feature.
● Port: Enter a port number for remote web-based management.
● IP Address: Enter the IP address of a PC on Internet authorized to
access and manage your router’s web-based utility remotely.
Note: If you enter 0.0.0.0 in the IP address box, then all PCs on
Internet can access your router’s Web-based utility to view or change
your settings remotely once you enable the remote Web-based
management feature.
● For example: If you want to allow only a PC at the IP address of
218.88.93.33 to access your router’s web-based utility from Internet via
port: 8080, you need to configure same settings shown in the diagram
above on your router. And what this IP user needs to do is to simply
launch a browser and enter http: //220.135.211.56:8080 (provided that
your router’s WAN IP address is 220.135.211.56).
59
To Next Page
Loading...
