Tap it to shutter or unshutter the camera lens. By default, the camera lens is
unshuttered.
After the camera lens is shuttered, the video image is disabled. At the same
time the camera lens automatically rotates downward to hide itself, and no
longer monitors.
Screenshots.
Tap it to save the screenshot of the current monitoring image to TDSEE
Album.
Recording.
Tap it to start recording, and tap it again to stop recording. Successful
recordings are automatically saved to TDSEE Album.
Tap it to enable or disable the camera audio. By default, the audio is disabled.
Tap it to view in full screen.
Add location.
Tap it to add a specified monitoring location for the camera.
Location selection panel.
Tap it to adjust the monitoring position of the camera.
To Next Page
Loading...