11N Wireless Broadband Router
Static IP
If your connection mode, static IP is chosen, you can modify
the following addressing information.
IP Address: Here enter the WAN IP address provided
by your ISP.
Subnet Mask: Enter the WAN Subnet Mask here.
Gateway: Enter the WAN Gateway here.
Primary DNS Server: Enter the Primary DNS server
provided by your ISP.
Secondary DNS Server: Enter the secondary DNS.
L2TP
L2TP Server IP: Enter the Server IP provided by your ISP.
User Name: Enter L2TP username.
Password: Enter L2TP password.
MTU: Maximum Transmission Unit, you may need to change
it for optimal performance with your specific ISP. 1400 is the
23
To Next Page
Loading...
